Home
Home Appliances
Inverters Price List
Compare Inverters
Luminous Optimus 2800+ Pure Sine Wave Inverter vs NXG+ 1100 Pure Sine Wave Inverter

Luminous Optimus 2800+ Pure Sine Wave Inverter vs NXG+ 1100 Pure Sine Wave Inverter comparison

Show Only Differences Highlight Differences	Luminous Optimus 2800+ Pure Sine Wave Inverter	NXG+ 1100 Pure Sine Wave Inverter
key specs
Colour	Blue	Blue
Output Voltage	200V	230V
Type	-	Pure Sine Wave
Input Voltage	-	110 VA
general
Brand	Luminous	Luminous
Model	Optimus 2800+ Pure Sine Wave Inverter	NXG+ 1100 Pure Sine Wave Inverter
Model Name	Optimus 2800+	NXG+ 1100
Colour	Blue	Blue
Technology Used	Pure Sine Wave Technology	-
Type	-	Pure Sine Wave
Solar Power Compatible	-	Yes
Battery Included	-	Yes
Back Up Time	-	8 hrs
Load Options	-	5 Fans, 5 LED
output features
Output Voltage	200V	230V
Efficiency	-	85%
Output Frequency	-	50Hz, +/-2Hz
battery features
Battery Type	Flat, Tubular and SMF	Tall Tubular
Number of Batteries	1	1
Battery Voltage	24V	12V
Battery Capacity	160AH	150AH
convenience features
Display Type	LCD	-
additional features
Installation	This product does not require installation. The features of the product are presented in the user manual that comes with it. Hence, the manufacturer does not provide on-site installation or demo for the product. In case of any queries about the installation or the features of product, kindly call us at 1800 208 9898 or (080) 49400000 for assistance.	-
dimensions
Width	32 cm	30 cm
Height	28.4 cm	20 cm
Depth	30 cm	20 cm
Weight	22.5 kg	11 kg
warranty
Warranty Summary	Warranty : 42 months* (21 months replacement warranty + 21 months prorata warranty), 24 months Inverter Warranty.	2 Years Manufacturer Warranty
Covered in Warranty	Incase of any backup issue , Product is collected from customer end and tested for backup time . It is replaced if found faulty.	Warranty Of The Product Is Limited
Not Covered in Warranty	Physical damage	External Damge Is Not Covered Only Internal Failures Only
Warranty Service Type	Incase of any defect in the product , the customer needs to register a service call at luminous toll free number 18001033039. Engineer visits in 24-48 hours and gives resolution.	Onsite
input features
Input Voltage	-	110 VA
Input Frequency	-	50Hz, +/-2Hz
description
Description	-	NXG+ range is a hybrid UPS range that intelligently uses grid and solar power. With ability to operate in a wide voltage range, NXG+ is the ideal starter solar solution for homes. ISOT Technology NXG+ Solar UPS uses Intelligent Solar Optimization Technique (ISOT). Once the batteries get charged, it cuts off grid power and supplies electricity through solar panels thus maximizing solar energy usage. This helps you save up to 3 units of electricity per day. Substantial money savings in the long run. Fast charging through i-Charge Technology If there are long power cuts in your area, you can use the i-charge fast charging mode for charging batteries in a short time when grid power is available. Note that when i-Charge is switched ON, Power saver mode is deactivated and the ups takes higher charging current from the grid. To activate this mode, use the i-charge ON/OFF switch at the back. ECO and UPS mode The NXG+ Solar UPS can run on two modes - UPS and ECO mode. UPS mode should be selected when the user wants to run computers. In the UPS mode, the system switches to battery backup if the mains voltage drops below 180 V. Safety and Protection Luminous NXG+ comes with many safety features built in. It continuously monitors the health of your batteries and protects them against deep discharge, overcharge and short-circuit. The Main fuse protects against excessive current thereby protecting your sensitive appliances. Pure Sine Wave Its pure sine wave output ensures safety and noiseless operation of connected appliances.